Product Guide
Operation
Maintenance
Troubleshooting
Download PDF
Contact Us
Operation
Instructions For Use
1. Turn anti-clockwise to open the cover.
2. Add BioCair Disinfectant Air Purifying Solution (300ml) into the tank.
3. Tighten the top cover and connect the USB adaptor.
4. Press and hold the ON/OFF button to operate the Ultimate Automobile Dry-Mist Disinfection Machine.
Mist Operating Instructions
- Continuous Mist Operation:
- Press the ON/OFF button, continuous misting will begin
- Intermittent Mist Operation for 3 seconds of mist, stop misting for 3 seconds:
- Press the ON/OFF button 2 times
- Stop Mist Operation:
- Press the ON/OFF button 3 times
Mist Operating Instructions
- Use only with BioCair Air Purifying Solution. Using essential oils or other liquids/ substances can lead to lasting machine damage, preventing the machine from operating efficiently.
- This machine can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instructions concerning use of the appliance in a safe way and understand the hazards involved.
- Cleaning and user maintenance shall not be made by children without adult supervision.
- Children should be supervised by a parent or guardian to prevent any potential hazards.
- Make sure to unplug the machine from the power source before filling or cleaning.
- If the supply cord is damaged, it must be replaced by BioCair Customer Care or a qualified person in order to avoid an electrical hazard.
How to Operate Ultimate Automobile Dry-Mist Disinfection Machine
Different Operating Modes for Ultimate Automobile Dry-Mist Disinfection Machine
WATER TANK
- The water tank should be cleaned regularly, most preferably once every 10 days with clean water and a soft brush.
- Detach tank from the cover, empty the solution contents from the machine.
- Dismantle the nylon rod and swab from the machine.
- Rinse the tank with tap water, use a soft sponge to gently rub if required.
- Wipe the cover and tank with a clean dry cloth.
Nylon Swab & Rod
- Replace the swab if it is rusty.
- Contact BioCair Customer Care for replacement if the rod is rusty.
USB Adaptor Cable
- Wipe down the USB adaptor cable with wet clean cloth, avoiding areas without rubber coating.
ISSUE | POSSIBLE REASON(S) | SOLUTION(S) |
---|---|---|
Little to no mist | The swab is not soaked enough | Switch off the machine, remove the cover and make sure both ends of the swab are soaked through before restarting the machine by putting everything back in place. |
Swab is damaged or rusty | Replace the swab, and if needed contact BioCair Customer Service for more swab replacements. | |
No light and no mist | Adaptor cable is damaged | Try to test it out with other available adaptors in the house. If it doesn’t work, contact BioCair Customer Service for a replacement adaptor. |
ISSUE | POSSIBLE REASON(S) |
---|---|
Little to no mist | The swab is not soaked enough |
Swab is damaged or rusty | |
No light and no mist | Adaptor cable is damaged |
ISSUE | SOLUTION(S) |
---|---|
Little to no mist | Switch off the machine, remove the cover and make sure both ends of the swab are soaked through before restarting the machine by putting everything back in place. |
Replace the swab, and if needed contact BioCair Customer Service for more swab replacements. | |
No light and no mist | Try to test it out with other available adaptors in the house. If it doesn’t work, contact BioCair Customer Service for a replacement adaptor. |
How to Troubleshoot Ultimate Automobile Dry-Mist Disinfection Machine